Set of four harder-composite suspension arms includes 2 lower arms (front/rear), 1 front upper arm, 1 rear upper arm. Two complete sets will replace all arms on NT18 and M18. 

Set of 2 molded composite front upper suspension arms for XRAY M18. These new arms have the same camber (-1°) as the stock upper arms, but less caster (6° caster vs. 12° caster stock). These arms provide improved steering, better handling into and out of corners. Highly recommended for serious racing and high competition… prepare to drop your lap times! 

Set of 2 molded harder-composite front upper suspension arms for XRAY M18 and NT18. These new arms have the same camber (-1°) as the stock upper arms, but less caster (6° caster vs. 12° caster stock). These arms provide improved steering, better handling into and out of corners. Highly recommended for serious racing and high competition… prepare to drop your lap times! 

Set of matched left and right composite suspension blocks. Fits front or rear. 

CNC-machined suspension block made from highest-grade Swiss aluminum fits XRAY M18 and M18T. Front left steering block also fits rear right on M18 and on M18T fits front right and rear right. All hardware is included. 

CNC-machined suspension block made from highest-grade Swiss aluminum fits XRAY M18 and M18T. Front right steering block also fits rear left on M18 and on M18T fits front left and rear left. All hardware is included. 

Adjustable turnbuckle for steering. 

Set of six linkages and ball joints includes center linkage, steering linkage between front steering blocks, rear toe-in linkages 4°, ball joints for front steering turnbuckle, and shim that is used between the left suspension block and servo linkage. 

Complete set of adjustable turnbuckles for adjusting front and rear toe on M18. A ‶must have※ for serious racers who need to precisely adjust front or rear toe. Set includes threaded rods, balljoints, and pivotballs. 

Laser-cut, heat-treated, precision-ground brake disk ensures vibration free operation. Fits NT18 and NT18T. 

Brake disk collar adapts brake disk to driveshaft. Fits NT18 and NT18T. Set of 2. 

Composite universal drive shaft set includes all parts necessary to build two complete drive shafts. 

CNC-machined alu drive shafts replace stock composite units. Smooth operation, providing extra strength for use with high-performance motors.  

Molded composite drive shafts with hex adaptors. Comes unassembled. Set of 2. 

CNC-machined drive shafts with hex adaptors are made from tough, high-grade T6 aluminum and high-strength steel pins and fasteners. Ultra-smooth operation, high-precision design and fit.  

Alu main driveshaft for NT18.

Note that the #385512 driveshaft for the M18 CANNOT be used on the NT18.
 

Radio plate, brake holder, front brace stand & front chassis brace included. Fits NT18 and NT18T. 

Complete set of composite pivot balls. 

Nickel-coated 4.2mm pivot ball (type C) fits M18 and NT18. Qty of 8. 

Nickel-coated 5.8mm pivot ball (type A) fits M18 and NT18. Qty of 16. 

Nickel-coated 5.8mm pivot ball (type B) fits M18 and NT18. Qty of 8. 

Complete set of 16 high-quality ball-bearings, set of twelve 6x10x3 and four 12x8x3.5 ball-bearings. 

Set of complete mounting hardware includes all fasteners, pins, washers, O-rings, etc. to assemble the M18. 

Set of four composite inner wheel adapters, front and rear. 

M3x4 setscrew, hex drive. Set of 10 pieces. 

M2.2x6 pan-head screw, self-tapping, Phillips drive. Set of 10 pieces. 

M2.2x8 pan-head screw, self-tapping, Phillips drive. Set of 10 pieces. 

M2.2x10 pan-head screw, self-tapping, Phillips drive. Set of 10 pieces. 

M2.5x12 pan-head screw, self-tapping, Phillips drive. Set of 10 pieces. 

M2.5x6 flat-head screw, self-tapping, Phillips drive. Set of 10 pieces. 

M2.5x12 flat-head screw, self-tapping, Phillips drive. Set of 10 pieces. 

M2.3x6 pan-head machine screw, Phillips drive. Set of 10 pieces. 

M2.5x6 flat-head screw, metric, Phillips drive. Set of 10 pieces. 

High-quality ball-bearings ID x OD x thickness (mm) = 6x10x3mm. Set of 2 pieces. 

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 6x10x3. Set of 2 pieces. 

Rubber O-ring 2.5mm thick x 1mm dia. Set of 10 pieces. 

Polished chrome pin. Dia. x length = 2mm x 8mm. Set of 10 pieces.